Walker System Art Exhibits And Displays Walker system, art exhibits, art displays, display systems, exhibit systems, walker display system, walker exhibit system 
The Walker System consists of the hardware
— the Uprights, Bases, Stiffeners, Junctions, etc. for holding all
kinds and sizes of panels to make displays and exhibits,
movable and portable, temporary or permanent. Your pegboard, plywood, wallboard
or other panel is the key to an attractive and
flexible exhibit in a variety of arrangements. Set-up is quick
and easy, all nuts and bolts needed for assembly are
furnished with complete instructions. Refer to the diagram to choose
your parts. FOB factory. Uprights — The vertical parts that
hold your panel to make a display. Made of anodized
aluminum. Concealed in the Upright are Clamps (1) which grip
the edge of any panel not over 1/2" thick. Also
concealed in the Upright are one or more Panel Supports
(2) on which the bottom edge of the panel rests
to insure a level and adequately supported panel. (Use 1
Upright in conjunction with a Standard and Junction Kit when
a Base is not required, such as in the center
of a configuration.) Bases — Bolt to the bottoms of
the Uprights (3). They hold free-standing units upright and stable.
Plated steel, available in the Flat Foot Base style. Flat
Foot Base — Clean, sculptured, almost impossible to trip over.
24" long. Standards — Consists of two uprights plus two
bases. Stiffeners and Stiffener Brackets — Clamp to the top
and bottom edges of long, thin or warped panels (4).
They add both stiffness and a finishing trim. Brackets (5)
are included for joining Stiffeners and Uprights and providing extra
strength. Hinged Junction Kit — Everything you need to join
2, 3, or 4 Uprights or Standards for a multi-panel
arrangement (6). (Uprights and Standards not included.) Note — Please
click here to contact our Product Information Department regarding questions
on ordering this product or for complete components needed.
Price: $32.99 |
|
